ITS FINALLY TIME - The Last Repairs On This Tractor Before We Send It To The Field!!!

Cheap (~$1.00/paid) but excellent work gloves I've been using:
amzn.to/2UyQ5CM
Knipex Pliers Wrench - Made in Germany:
amzn.to/2XIlMLP
Copper Washer Assortment:
amzn.to/2TEzTDu

NHẬN XÉT

  1. ChuckE2009

    ChuckE2009

    2 tháng trước

    Cheap (~$1.00/paid) but excellent work gloves I've been using: amzn.to/2UyQ5CM Knipex Pliers Wrench - Made in Germany: amzn.to/2XIlMLP Copper Washer Assortment: amzn.to/2TEzTDu

    • KDJ Fishing

      KDJ Fishing

      2 tháng trước

      ChuckE2009 what happened to the loader sorry if you said already

    • Krista Foster

      Krista Foster

      2 tháng trước

      Hey chuck please call me 5744012465 my husband has a question for you about your antique john deer tractors or if you can help him find a antique john deere tractor in particular that has sentimental value to him that got stolen out of our barn 2 years ago

    • Chadley DoRight

      Chadley DoRight

      2 tháng trước

      Chucke Suggstion on Hydraulic leak. Remove the non-leaking nut on the hydraulic valve block and see how that one is sealed.

    • Chadley DoRight

      Chadley DoRight

      2 tháng trước

      A couple things most don't know. Most automotive cars and trucks have a mesh screen built into the reservoir. These are the hi mileage cars with filthy power steering proper level and sometimes they make whining noises as the pump is starving itself to pump the fluid.

    • Petes Adventures

      Petes Adventures

      2 tháng trước

      I bought my mate a pair of these pliers and he loves them.

  2. Tracty Zadorozny

    Tracty Zadorozny

    12 ngày trước

    Avaiation gaskey sealer works on block heaters

  3. MrLGstone

    MrLGstone

    Tháng trước

    There is a dealer for parts for that machine in TN. I have wrenched on a hand full of those machines....

  4. Miguel Maciel Villanueva

    Miguel Maciel Villanueva

    Tháng trước

    that is a full hydraulic steering system. if you hold the steering wheel to a load when you start up your engine it will keep the hydraulic fluid from returning all the way to the pump. if the fluid returns you will have to wait a couple of minutes to get it all the way up to the orbital valve of the steering wheel

  5. ken beattie

    ken beattie

    Tháng trước

    What a great design. If the leaks are bad enough, the filter in the hydraulic system will never get dirty! You fouled up the Zetor master plan by fixing the lines, you fool!

  6. Bundy Bears Shed

    Bundy Bears Shed

    2 tháng trước

    Man you buy more old tractors than I do. lol. I think it is a disease.

  7. Digicor Inc

    Digicor Inc

    2 tháng trước

    I want to get a tractor for investment property yard clean up and general utility which may include digging foundation footings. What would you recommend for a good all around diesel tractor that may be old, but parts can be easily had for it. I prefer not to invest more than 5 grand to start, because of my limited true need. I can weld and have access to good diesel mechanic.

  8. John Holmes

    John Holmes

    2 tháng trước

    you should stick to welding, might want to forget fixing equipment and farming... Just sayin.

  9. Denis O'brien

    Denis O'brien

    2 tháng trước

    all cars have power steering filters, (atleast here in the uk) it usually filters the return before it goes into the tank, and is part of the tank. And interestingly as most folk dont know about them, is often the cause of power steering failures at low engine speed :)

  10. yambo59

    yambo59

    2 tháng trước

    Seeing theres a dipstick could it be overfilling the reservoir is causing issues with the power steering operation-??

  11. yellowdeer 7

    yellowdeer 7

    2 tháng trước

    That tractor is euro trash.

  12. n5ifi

    n5ifi

    2 tháng trước

    Zetor? hahaha

  13. MFB Alaska

    MFB Alaska

    2 tháng trước

    My old Mercedes Diesels all have power steering filters ;-)

  14. arthur vassallo

    arthur vassallo

    2 tháng trước

    I have a 1966 ford 3 cyl. tractor, with bad injector pump, can I start it by missing diesel in the intake to see if it will start, I brouth it not knowing if will run.

    • Turbo Diesel

      Turbo Diesel

      2 tháng trước

      @ arthur vassallo : No, misting diesel into the intake will not work. Use ether or a silicone spray (that uses a flammable propellent such as butane or propane) in the intake while cranking the engine. When using either method, don't use a lot, and don't run the engine on the injected propellent more than a few seconds, just to verify the engine will run.

  15. MFB Alaska

    MFB Alaska

    2 tháng trước

    Clean shaven looks good on you

  16. Abdul Kurad

    Abdul Kurad

    2 tháng trước

    Good job Sir thanks

  17. Rick Allen

    Rick Allen

    2 tháng trước

    Do you have any equipment that works properly?

  18. eugene snell

    eugene snell

    2 tháng trước

    For the record, I will never truly knock your mechanical ability! You are more mechanically inclined than I am (and I ain't no slouch)!!! You know your limitations (better than most), and you are willing to ask (barter, or beg!) for help WHEN necessary! In my book that makes you smarter than a great deal of people out there!

  19. Jeff Gootjes

    Jeff Gootjes

    2 tháng trước

    Unfortunately this is what happens when you own a bunch of old worn out tractors. You’re constantly chasing your tail trying to fix leaks and other issues but you don’t have enough time to do it right because there are 5 others with the same problems.

  20. Termite Tucker

    Termite Tucker

    2 tháng trước

    I've got A5211 center great tractor

  21. mitzvos Golem

    mitzvos Golem

    2 tháng trước

    "strong like bull smart like tractor" Eastern Europe not to good at making machinery. Belarus and Zetor disaster. Best to not put alot into it.

  22. Eric Becker

    Eric Becker

    2 tháng trước

    Where's the welding videos?

  23. Sean Jennings11

    Sean Jennings11

    2 tháng trước

    There is one standard tyre and one wide tyre on the tractor

  24. Drew w

    Drew w

    2 tháng trước

    You’re going to regret not having another loader tractor when you’re hauling bales since you won’t have a loader at home to unload and stack bales.

  25. Antonio Claudio Michael

    Antonio Claudio Michael

    2 tháng trước

    Great video ChuckE2009

  26. actorzone

    actorzone

    2 tháng trước

    Zetor's that were owned here all ended up on the scrap heap, yours should be in a museum as its unusual "It's intact" I bet when you bought it it came with 30 foot of anchor rope.

  27. Matt Selan

    Matt Selan

    2 tháng trước

    Hydraulic leak on power steering plug. Wrap the threads in teflon tape. Be sure it's the one made for hydraulic applications.

  28. Ferdinant Pazziolo

    Ferdinant Pazziolo

    2 tháng trước

    He put the filter back in the wrong way! At 15:44 is the spring under the nut, pushing down on the filter. He put it back together on top of the nut, pushing up the cover 😂😂

  29. Mike Schwin

    Mike Schwin

    2 tháng trước

    A cherry bomb for a muffler?

  30. TIMOTHY WRENN

    TIMOTHY WRENN

    2 tháng trước

    I'd put a rubber expansion plug in & delete the block heater! unless your in extreme cold area not needed & if tractor in a field you would need a portable generator! don't forget to subscribble!!

  31. Unfounded Lost

    Unfounded Lost

    2 tháng trước

    Can you do more on the backhoe

  32. Jamie Mieirs

    Jamie Mieirs

    2 tháng trước

    You sound like kermit the frog when you do that vioce

  33. Ben Harleman

    Ben Harleman

    2 tháng trước

    I never start or move equipment without checking all fluids

  34. Bill Lee

    Bill Lee

    2 tháng trước

    The problem is that when you buy a tractor from a third world country you now have its third world problems, and you have a first world job to do with it.

  35. Jason Patterson

    Jason Patterson

    2 tháng trước

    Buy local, support local, pay for quality

  36. cullen9017

    cullen9017

    2 tháng trước

    Always do pretrip. Starting it for a second or running all day, always check fluids and other consumable parts

  37. Szaa

    Szaa

    2 tháng trước

    Below the water separator you have two fuel filters. If I remember correct there are 3 types of the inserts. I didn't catch up if you changed them ;)

  38. BILL W

    BILL W

    2 tháng trước

    Any heavy equipment! check fluid levels every time you use it

  39. swampratt36

    swampratt36

    2 tháng trước

    Zetor.... that's Czech for recycled WW2 helmets , or in America ... scrap .🤣😂

  40. Tony H.

    Tony H.

    2 tháng trước

    Why don't you have ABOM79 build you a new steering cylinder?

  41. George Marshall

    George Marshall

    2 tháng trước

    Chuck I've got five zetors,two 6211s and two 7711s and one 4320 never had a problem with block heater leaking,really never use the block heater.

  42. Klaus Van Heusen

    Klaus Van Heusen

    2 tháng trước

    We all learn something new every day? What was that?

  43. G35GUY04

    G35GUY04

    2 tháng trước

    ChuckE2009 what the heck happend to the monster extended tractor you built. Havent seen it in a long time

  44. TheSuperJank

    TheSuperJank

    2 tháng trước

    Thanks for teaching me to mig weld, my dad’s retiring friend sold me his Hobart 140 for $1, as long as he has access to it if he needs a welder again. It’s already been very useful

  45. Jackson Smith

    Jackson Smith

    2 tháng trước

    He needs to put some flex seal on the block heater to keep it from leaking

  46. G POWER DRAGON

    G POWER DRAGON

    2 tháng trước

    If you use full synthetic oil block heaters not necessary

  47. Jason Buis

    Jason Buis

    2 tháng trước

    I would just stick on a magnet heater or use a inline heater on a radiator hose.

  48. MrJeep75

    MrJeep75

    2 tháng trước

    Semi's got filters

  49. David Henderzahs

    David Henderzahs

    2 tháng trước

    chucke2009 that one tractor has been sitting there forever finish the lines and or get it operational to chucke standard so rolling HAHA love the vids man currently in texas myself thought about taking leave sometimes to come to you around Dallas area to help you with some equipment get it running sense steeve can't all the time get you more operational if you ever want the help just hit me up send me a message the wife will learn to be ok with it HAHA

  50. Stephen Mayfield

    Stephen Mayfield

    2 tháng trước

    The power steering set up on the tractor looks a lot like the system on my sea-ray fishing boat. I would check with a marine repair shop if you need to rebuild it in the future.

  51. RON SALES

    RON SALES

    2 tháng trước

    Buy one that goes into your radio hose and delete that one.

  52. elkvis

    elkvis

    2 tháng trước

    It sounds like this is an opportunity for you to become an expert on Zetor power steering. $$$

  53. Steve Skouson

    Steve Skouson

    2 tháng trước

    About 12 and a half minutes in. Does that right rear tire look larger than the left one? Or, is it my weird monitor or eyes? steve

    • Sean Jennings11

      Sean Jennings11

      2 tháng trước

      Ya one tyre is bigger than the other I saw it to

    • Klaus Van Heusen

      Klaus Van Heusen

      2 tháng trước

      Steve Skouson better traction on right hand turns!

  54. mst5632

    mst5632

    2 tháng trước

    If the hydraulic plug doesn’t seal with the cooper washer I know why...you added a cooper barrel lug as that is what your affiliate link links to. :-) I got nothing but love for you Lanse so don’t take me pointing this out the wrong way. I just wanted to buy a copper washer kit. :-) Rock on brother. Love your channel.

  55. john doe

    john doe

    2 tháng trước

    i can hear chucke thinking now " lets see i will need a trailer, with a air compressor, a generator, few jacks, some jack stands, full set of tool , transmission fluid, brake fluid, oil, antifreeze, 200 gallons of water,oh yea and my lunch. ok now i can take the tractor to the field"

    • gaspowerrules

      gaspowerrules

      2 tháng trước

      Doesnt need set of tools just the knipex pliers

  56. Braxton witteveen

    Braxton witteveen

    2 tháng trước

    You shouldn’t start a tractor reved all the way up it’s bad for the engine

    • Braxton witteveen

      Braxton witteveen

      2 tháng trước

      +Turbo Diesel m pop said that we shouldn't start our Deutz or ford or new holland reved all the way up because it is bad for a dry block

    • Turbo Diesel

      Turbo Diesel

      2 tháng trước

      +Braxton witteveen Wise to open throttle to 1/4 to start most any internal combustion engine. You can start 'em wide open but should immediately bring the throttle back down to around 1/4 open once it "fires".

    • Braxton witteveen

      Braxton witteveen

      2 tháng trước

      ok my pop told me that you shouldn't because it is bad for the motors like on our ford 4600 and our Deutz agroprimar 6.61

    • erienwhite

      erienwhite

      2 tháng trước

      There are actually some out there that the factory procedure is to start them at full throttle.

  57. 379insk

    379insk

    2 tháng trước

    I used to actually like this channel...... Now I just watch to laugh at!

    • Joseph M

      Joseph M

      2 tháng trước

      I like it, and it shows reality, something foreign to you.

  58. M. Pierce

    M. Pierce

    2 tháng trước

    why are you leaving the loader control valves on there ? I would delete them and the problem with them . I am sure if you just connected the hoses as there probly open center valves that would work and the valves can go in the junk pile . and as per your block heater here in Minnesota I put lots of those in at work and have found that the best solution is use THE RIGHT STUFF to seal the o ring and put a dab under the bolt head before you install works for me .and if you have not used THE RIGHT STUFF get yourself a tube for you caulking gun you will not use silicon or rtv much after you get this stuff . and for your steering john deere ford and white used a similer system even for used in on cars for years if you lived closer to fargo I am sure we could repair it at the shop I work at

  59. Zachary Baze

    Zachary Baze

    2 tháng trước

    Really enjoy watching all your videos ChuckE. I always cant wait to watch ur next video

  60. Andrew Soots

    Andrew Soots

    2 tháng trước

    Watching more liking it less

  61. Bill Nowlin

    Bill Nowlin

    2 tháng trước

    Block heater Smlock heater!!! your are in TEXAS ;-)

  62. Alan Shilliday

    Alan Shilliday

    2 tháng trước

    Some one show ChuckE how a zetor ignition switch works. Push on, pull off, turn for lights.

  63. Jim Willoughby

    Jim Willoughby

    2 tháng trước

    After all that work the Zet sounds good. Well done, Chuck

  64. Jay Cummings

    Jay Cummings

    2 tháng trước

    Just sell all that junk and buy a decent tractor already.

    • J P

      J P

      2 tháng trước

      Keywords *sell all that junk*

  65. Mike

    Mike

    2 tháng trước

    On the power steering ram why not take it off , take to hydraulic shop get them to make a new ram with fitting on both ends of metal tube like on a log splitter.

  66. Mister Myxlplyx

    Mister Myxlplyx

    2 tháng trước

    What a pile. Get an international

  67. Bill Shafley

    Bill Shafley

    2 tháng trước

    The hydraulic “plug” you removed is called an anti load drop check valve...jackass

  68. Bikerchic

    Bikerchic

    2 tháng trước

    Chucke- you should also post these videos to Rumble. It will make you more $ than utube

  69. Fayette Fishing Outdoors

    Fayette Fishing Outdoors

    2 tháng trước

    I usually like to give constructive criticism.... but usually I do not have near as many problems with used equipment. Seems like your off brand tractors give you trouble

  70. Michael Mueller

    Michael Mueller

    2 tháng trước

    Is there a torque spec on those bolts leaking?

  71. Havack1

    Havack1

    2 tháng trước

    So fix the hydraulic leak by removing the valves. One hose in pressure and the other is return. butt them together or connect them at the source.

  72. Shane Brey

    Shane Brey

    2 tháng trước

    Just one question why is their a cherry bomb glass pack on the exhaust??

    • aXe

      aXe

      2 tháng trước

      Unless this is your first ChuckE video, I think you know why.

  73. Elliot Agosto

    Elliot Agosto

    2 tháng trước

    Yo what's up Chucky haven't seen most of your videos recently is VNchannel taking a backseat to your businesses also I haven't seen any welding videos for a while that was the main reason I started watching you a few years back not that I need them anymore what they were entertaining especially seeing you douche it and talk about stuff that I either did myself or I saw happen to other people especially the welder jokes got gas?

  74. Robby Schemonia

    Robby Schemonia

    2 tháng trước

    The proper torque for ANYTHING, in the words of AvE, tighten it down until you hear the crack, then back it off a quarter turn. Sounds good to me!

    • Matthew Hall

      Matthew Hall

      2 tháng trước

      Robby Schemonia GRRRRRRRRRRRRRRR!!!!! Click!

  75. David TheCarpenter

    David TheCarpenter

    2 tháng trước

    My 6040 has the same issues... Terrible reservoir, an $800 steering arm and I wish I'd just stuck with the extra gallon of hydraulic steering fluid and topped it off every eight hours. The tractors 30 years old so another 20 wouldn't have cost as much as the repair.

  76. yveskc1

    yveskc1

    2 tháng trước

    Ok... one step forward and two backward.

  77. steve sykes

    steve sykes

    2 tháng trước

    I LIKE YOUR TRACTOR VIDES BY THE WAY I HAVE AN 8N FORD REAL FIX UR UPPER SELL CHEAP

  78. peter kirwan

    peter kirwan

    2 tháng trước

    Love your videos 🇨🇮

  79. andrewkiwi1

    andrewkiwi1

    2 tháng trước

    At 19.10 just as you said "NOT A DROP" the lower lefthand elbow dripped. You are doing well Chucky. You are learning well.

  80. James Pietrzykowski

    James Pietrzykowski

    2 tháng trước

    What I really do not understand is this, why the hell you waste so much time “repairing” tiny problems? Rip apart everything to stop a tiny leak. Every tractor I have seen or ran had some leaks. It’s just normal. I don’t get it. Such a waste of time imho

  81. J F

    J F

    2 tháng trước

    Fortunately there are plenty of farmers with farm equipment that works and is reliable, or else a lot of people in the USA would have to go hungry!

    • Indosarnia

      Indosarnia

      2 tháng trước

      +Chris Matthewson entertainment - yes .....asfor relying on Chooky to actually bring in any crops....

    • Chris Matthewson

      Chris Matthewson

      2 tháng trước

      We could all do that! Charge the earth for our produce and then spend the money getting someone else to fix, service and maintain our tractors regularly. ChuckE likes to restore things and do it himself. That is admirable and provides us with entertainment an knowledge.

  82. Doug Hunt

    Doug Hunt

    2 tháng trước

    Are you sure your fuel isn't growing things? Whatever that is that gets in fuel can cause great trouble unless youtreat it and get rid of it.

  83. redlinepaul410

    redlinepaul410

    2 tháng trước

    Northern tools sell hydraulics close to that ram.

  84. subaruVaggos

    subaruVaggos

    2 tháng trước

    ChuckE do us a favor; install a 12V diesel pump to eliminate the need to primer the fuel lines before cold start. Will save you time and frustration. Trust me, I have a ZETOR here in Greece and the first thing I've done is to install an electric diesel pump to stop priming everytime. Much faster cranking and start up and less frustration (especially on really cold days). Also check the manual for your power steering. My Zetor has a belt driven pump and not this monstrocity of yours. Much cleaner look and less parts to maintain. Maybe this is an aftermarket customization of the the previous owner. The exhaust of your tractor is too high, lower it by cutting a few inches. If it rusts you gonna see it falling of and you will must make a new one. Trust me I changed 3 original exhausts before I make my own shorter and lighter exhaust.And last one, you don;t have to turn the keys all the way everytime. Just pull it up so they dont engage the electrical system. I left the keys on for a long period of time by just pulling it a little bit o diconnect it from the whole system. Never used the central breaker and never had any failing battery....

    • GoofyLeo3

      GoofyLeo3

      2 tháng trước

      Chuck stopped being educational awhile ago. Now it's just comical. 😣

    • Mike D

      Mike D

      2 tháng trước

      Some sound advice that has fallen on deaf ears

  85. Dillon Ledeboer

    Dillon Ledeboer

    2 tháng trước

    Did he finally get rid of the Mahindra

  86. Morrison's Marine And Small Engine

    Morrison's Marine And Small Engine

    2 tháng trước

    Hydraulics dripped at 13:47 from the plugs

  87. The Walrus

    The Walrus

    2 tháng trước

    When I had a fleet of tractors (and earth moving equipment) to maintain, I kept a master list of every filter I could find, and all the crossover filters I could find (Thank you Bento for iOS, y’all made this chore dead simple, especially for the filters that were common on multiple machines), and when NAPA would have their GREAT BIG FILTER SALE, I’d buy two or three of everything. Some of these, like the monster air cleaner filters on the bigger tractors would be damn near 90% OFF… Great savings on something you’re going to need several of over the next year.

  88. Michael Cook

    Michael Cook

    2 tháng trước

    Fun time with ChuckE....always good.

  89. J P

    J P

    2 tháng trước

    I'm old enough to remember when Chucke2009 posted welding videos EDIT: Not trying to dis the guy. It's his money and his channel. This is Merica. He can do what the fuck he wants. I just miss the welding videos. That's all

    • deme7063

      deme7063

      2 tháng trước

      I remember when Chucke lived in Ohio

    • Mike D

      Mike D

      2 tháng trước

      Thems were the days

    • J. Szewczyk

      J. Szewczyk

      2 tháng trước

      I've been around since it was tractors the first round, then welding, now we're here.

    • Jackson Smith

      Jackson Smith

      2 tháng trước

      Same here

    • markd8405t5000

      markd8405t5000

      2 tháng trước

      No he never posted welding videos, it's a tractor restoration channel !!!!!

  90. J Farming

    J Farming

    2 tháng trước

    My 3320 has a different power steering than that and it’s original

  91. Stephen Cox

    Stephen Cox

    2 tháng trước

    Lol, I love the commentary.

    • Buckinthetree 123

      Buckinthetree 123

      2 tháng trước

      +Joseph M thanks.

    • Joseph M

      Joseph M

      2 tháng trước

      +Buckinthetree 123 Oh shut up, you whine too much.

    • Buckinthetree 123

      Buckinthetree 123

      2 tháng trước

      That was sarcasm Mr. Cox. I've watched enough of your videos to know you are a very competent mechanic. I just can't stand the fact that he insinuates that all farmers and ranchers and incompetent when it comes to maintaining equipment. I highly doubt he bought any of those tractors from an actual farmer or rancher.

    • Buckinthetree 123

      Buckinthetree 123

      2 tháng trước

      You changed out a bearing in the rear end, and put that milky oil back in it? He just blasted the guy that he bought his last tractor from for having water in the rear end, so I know that didn't happen on his watch. That sounds like a farmer fix. You know, how all farmers are stupid, and just patch things along until Chuckie buys them.

  92. Goran Virag

    Goran Virag

    2 tháng trước

    This power steering system is actuallly very good, and it can work fine for decades. But this aftermarket shit is another pair of sleeves.

  93. Jim Long

    Jim Long

    2 tháng trước

    Your Rule #1 Anything you purchase on the internet you will get screwed. So getting upset is not an option.

  94. SevenOfNine xx

    SevenOfNine xx

    2 tháng trước

    where do you park these things in a lake ?? seems every tractor you have is full of water

    • Chris Matthewson

      Chris Matthewson

      2 tháng trước

      That's the Tractor that he kept under the lean-to/car porch next to his house. That exhaust pipe only just clears it. Maybe they have had a lot of rain in Texas recently?

  95. r r

    r r

    2 tháng trước

    clean the tank

  96. Billy Baxter

    Billy Baxter

    2 tháng trước

    Is that hydraulic fluid suppose to white

    • John Lieske

      John Lieske

      2 tháng trước

      NO . Any oil that look like that has gotten water mixed in it .

  97. Magic Tune

    Magic Tune

    2 tháng trước

    Another good one!

  98. biggest D

    biggest D

    2 tháng trước

    FLAT EARTH BAM NO DOUBT ABOUT IT

  99. Keith Bishop

    Keith Bishop

    2 tháng trước

    just sell the piece of crap and buy a john deere

    • jerry davis

      jerry davis

      2 tháng trước

      He has one and will F... it up as well.

  100. Mike McAuliffe

    Mike McAuliffe

    2 tháng trước

    I was driving through the country here in NC the other day and I happened upon a Zetor dealer. I wonder if they could help you out with some parts.

    • Indosarnia

      Indosarnia

      2 tháng trước

      he doesn't need parts...and they don't sell ability

    • Goran Virag

      Goran Virag

      2 tháng trước

      They could, because new Zetors are very similar to the old ones, and a lot of parts are the same...

Tiếp theo